By registering with our site you will have full instant access to:
268,000 posts on every subject imaginable contributed by 1000's of members worldwide.
25000 photos and videos mainly relating to the British Merchant Navy.
Members experienced in research to help you find out about friends and relatives who served.
The camaraderie of 1000's of ex Merchant Seamen who use the site for recreation & nostalgia.
Here we are all equal whether ex Deck Boy or Commodore of the Fleet.
A wealth of experience and expertise from all departments spanning 70+ years.
It is simple to register and membership is absolutely free.
N.B. If you are going to be requesting help from one of the forums with finding historical details of a relative
please include as much information as possible to help members assist you. We certainly need full names,
date and place of birth / death where possible plus any other details you have such as discharge book numbers etc.
Please post all questions onto the appropriate forum
I have been overwhelmed by the number of requests for new passwords
It is going to take a while as each one has to be dealt with and replied to individually but I am working on them and will get back to you as soon as I am able.
Brian.
Thank you for your patience, I am getting there.
-
8th October 2012, 12:04 PM
#41
Hi Calvin,
A Cargo Control Room is where the Officer of the Watch starts and controls the cargo pumps and stripping pumps etc, On a VLCC, Very Large Crude Carrier, it is usuall on the deck on the fore part above the main deck so it can be observed visually. also above the Pump Room which is down below.
It contains the Pump Controls , usually four cargo pumps, and also ballast pumps. and eductors.
It has mercury indicators that shows the ullage or depth of oil in each tank.
No ullages are taken visually as the tanks are pressurised with the Inert Gas System that keeps oxygen out of the tanks therefore eliminating the risk of explosion. PV Valves open up and blast the gasses high into the air at a certain pressure then snap shut again. [The man who invented that system married a girl friend of mine, he became a millionaire, bought a huge mansion, so I was out]
The tank valves are also opened and shut from the Cargo Control Room with hydrolics.
It also has a LoadMaster Computer that shows the sheer stresses imposed on the hull when loading oil into various tanks to prevent the ship from breaking.
I hope this explains what a control room is. They didnt have them on T2s.
Cheers
Brian.
-
Post Thanks / Like
-
8th October 2012, 12:12 PM
#42
Fleming Gear.
Tony we use to call this type Barmaids Gear,because of the action needed (Like pulling a pint) It was mostly on Liners were the manning of the many L/Boats didn't require much small boat handling skills. CPR. in Montreal would have Boat-Drill and send away a few L/Boats (with a mixed and motley crew) It was great fun,racing around the Harbour.
I was painting Ships decks up untill I retired,and we used the modern anti-slip/skid paint but for well used areas of the deck we added fine sand as a back up. Peter,
.
. Hi Peter, I remember those boat drills on the Empress boats in Montreal, One time one of them got too close to the River at the end of the piers and was swept away down stream. They landed miles away and had to come back to Montreal on a bus all wearing life jackets. Everyone laughing at them, A tug bought the life boat back later.
.
I have used sand in the paint for decks on many ships for none slip. On the Big Ones the white track around the fore deck , the walk way, was also used as a Jogging Track by some for exercise. so the sand was good for that.
Cheers
Brian.
-
Post Thanks / Like
Similar Threads
-
By cappy in forum Poetry & Ballads
Replies: 0
Last Post: 21st February 2014, 12:31 PM
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules